Karadar Car GPS anti radar detector 2 in 1 Police Speed GPS for Russian LED Display 360 Degree X K CT L with 2.4 inch display

Karadar Car GPS anti radar detector 2 in 1 Police Speed GPS for Russian LED Display 360 Degree X K CT L with 2.4 inch display
  • Продавецswtst.co
  • Список ценUS $44.25piece
  • Продажная ценаUS $44.25piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,5 (211)

Oписание продукта

 
Description: 
 
 
This 7.0" TFT LCD Module can be can be easy controlled by MCU such as 51,AVR,STM32,PIC,MSP430,DSP,ARM, and ARM .It can be used in any embedded systems which require display high quality colorful image. The Module used
SSD1963  LCD controller with 7 inch LCD module with touchscreen. This LCD has a superior display quality and super wide viewing angle, please see the sample pictures, they are taken directly from the LCD display.
 
 
Features: 
 
 
7.0" TFT LCD Module, Resolution 800x480, SSD1963  Controller
LCD Type: TFT Transmissive Normal White 
Interface: 16bit parallel bus interface 
PCB Color: Blue 
On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight 
LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace 
Module dimension: 186mmx106mmx23mm(including pin header extrusion) 
Active Area: 154mmx86mm 
Pixel pitch: 0.179mmx0.179mm 
Standard 2x20 2.54mm pin header for connection to MCU/development board 
Module weight: 410grams 
 
 
 
Warning: All data port voltage can not exceed 3.6V. 
 
 
 
Package Included:
 
 
1PCS*New 7" inch TFT LCD module 800x480 SSD1963 Touch PWM For AVR STM32 ARM77 1

 

 

__

 

Features:
With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current.
The efficiency can be up to 96%, measured at 20A, converting 24V to 12V.
It is designed with 75V/80A large current dual MOS tube.
Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output.
Wiring is convenient with these large current 30A screw terminals.
The buck module has 2 heat sink that could enhance heat dissipation.
When there is a big difference between input and output voltage, please decrease power and current.
 
Specifications:
Input Voltage: 6V to 40V DC(10V to 40V is suggested)
Output Voltage: 1.2V to 36V DC
Output Current: 20A(max.), 15A(suggested)
Efficiency: 95%(24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"
VO+: Output positive
VO-: Output negative
+IN: Input positive 
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant current

 

 

Description: 
 
 
This 7.0" TFT LCD Module can be can be easy controlled by MCU such as 51,AVR,STM32,PIC,MSP430,DSP,ARM, and ARM .It can be used in any embedded systems which require display high quality colorful image. The Module used
SSD1963  LCD controller with 7 inch LCD module with touchscreen. This LCD has a superior display quality and super wide viewing angle, please see the sample pictures, they are taken directly from the LCD display.
 
 
Features: 
 
 
7.0" TFT LCD Module, Resolution 800x480, SSD1963  Controller
LCD Type: TFT Transmissive Normal White 
Interface: 16bit parallel bus interface 
PCB Color: Blue 
On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight 
LCD-specificed intialization code is provided, so that you can save time to optimize power control register and gamma curves for best display performance. We have test the provided code, it gives the best display performanace 
Module dimension: 186mmx106mmx23mm(including pin header extrusion) 
Active Area: 154mmx86mm 
Pixel pitch: 0.179mmx0.179mm 
Standard 2x20 2.54mm pin header for connection to MCU/development board 
Module weight: 410grams 
 
 
 
Warning: All data port voltage can not exceed 3.6V. 
 
 
 
Package Included:
 
 
1PCS*New 7" inch TFT LCD module 800x480 SSD1963 Touch PWM For AVR STM32 ARM